Promotional Banner
Call Toll Free 1-855-827-7223
Orders Over $200* Ship Free!
Shopping Cart
Shop By Keyword

Fore Innovations Fuel System Level 2 Dual Pump (11-17 Mustang GT/GT350) 42-522

Fore Innovations Fuel System Level 2 Dual Pump (11-17 Mustang GT/GT350) 42-522
Fore Innovations Fuel System Level 2 Dual Pump (11-17 Mustang GT/GT350) 42-522
Item#:fore-42-522
Regular price:$1,728.00
Sale price:$1,555.20
Intake Manifold / Power Adder:
Intake Manifold Configuration:
Primary Fuel Pump:
Secondary Fuel Pump:
Fuel Rail Option:
Electrical Upgrade:
Add Main Power and Ground Harness for FC3:
Add Three Pump Pigtails for FC3:
Add Main Power and Ground Harness for FC2:
Add Two Pump Pigtails for FC2:
Fuel Lines:
Fuel Pressure Regulator:
Filtration Media:
Filter Selection:
Add Billet Mounting Bracket:
Add Filter Monitoring Gauge and Fitting:
0-100psi Fuel Pressure Gauge:
Add Honeywell Pressure Switch for FC3:
Add Flex Fuel Sensor Intercept Kit:
Add Boost/Vacuum Manifold Kit:
Include 6mL tube of Loctite:
Include Black Touch-up Pen:
Include AN Soft Jaws and Wrench Set:
Quantity:
Fore Innovations S197C Level 2 Dual Pump Fuel System for 2011-2017 Mustang GT upgrades your stock system to a return style and is now capable to run E85. This 1200+ rwhp capable return fuel system is a simple system with effective hose routing. The feed line run the fuel rails in series and terminates with our stainless/ceramic valve F2i fuel pressure regulator.

Kit Includes
• S197-C / S550 Fuel Pump Module - Dual Pump
• F2i Fuel Pressure Regulator
• 2011-2017 Mustang GT Billet Fuel Rails
• 88mm Inline Fuel Filter
• FCV Checkvalve
• All fittings, hose, and hardware to complete typical fuel line plumbing

Electrical Upgrade
None: base module configuration, 6" [150mm] of pump power wire protrude from top of hermetic seal

FC2 Controller with 6 gauge wiring:
- Operates both pumps simultaneously, using factory control
- Best for controlling two small fuel pumps for street duty, or two large fuel pumps for track use only (due to fuel heat)
- May be used for control of secondary pumps with triple module IF [a small] primary pump can be run by OEM harness
- Includes 14' [4.2m] of 6 AWG power wire and 100 amp fuse
- Includes 3' [.9m] of 6 AWG ground wire with ring terminal
- Includes 7' [2.1m] 12 AWG pump leads and sealed Delphi connector at pump module

FC3 Staged Controller with 4 gauge wiring:
- Operates secondary pump(s) independently from primary pump using factory control in conjunction with a secondary trigger source.
- Best for controlling two or three large fuel pumps for street duty and minimizing heat
- Includes 14' [4.2m] of 4 AWG power wire and 100 amp fuse
- Includes 3' [.9m] of 4 AWG ground wire with ring terminal
- Includes 7' [2.1m] 12 AWG pump leads and sealed Delphi connector at pump module

Sealed Delphi Connector and 7' 12 AWG pigtail only
- Includes 7' [2.1m] 12 AWG pump leads and sealed Delphi connector at pump module
- Installer is responsible for properly implementing fuses and relays

Filtration Media
CELLULOSE FILTER ELEMENT
- cellulose element, bonded aluminum endcaps, Viton o-ring
- provides 10 micron nominal, 14 micron absolute filtration
- use with gasoline and race gas
- disposable
- recommended filtration for use with Injector Dynamics fuel injectors

MICROGLASS SSD (ANTI-STATIC) FILTER ELEMENT
- microglass element, static dissipating, bonded aluminum endcaps, Viton o-ring
- provides 12 micron absolute filtration
- use with all fuel types and blends (i.e. gasoline, race gas, E85, E100, M5, diesel)
- disposable
- recommended filtration for use with Injector Dynamics fuel injectors

STAINLESS FILTER ELEMENT
- stainless element, stainless endcaps, Viton o-ring
- provides 10 micron nominal, 26 micron absolute filtration
- use with all fuel types and blends (i.e. gasoline, race gas, E85, E100, M5, diesel)
-re-usable

Fuel Filter Upgrades
Upgrade to 128mm Filter
- Upgrade from standard 88mm filter to 128mm filter length for more filtration capacity and more time between service intervals.

Billet Mounting Bracket
- Use it to mount filter under car body, show quality installation to secure mounting of filter assembly for ease of maintenance

Filter Monitoring Gauge and Fitting
- Use to monitor fuel pressure before filter to inspect filter health. A higher pressure before filter indicates loss across the filter. If ignored, substantial filter obstruction will lead to reduced pump performance, shortened pump life, and higher fuel heat. Fitting is includes to allow precise orientation of pressure gauge.

System Options
Honeywell Pressure Switch for FC3
- 1/8 NPT Male threads, installs in intake manifold, must see boost and vacuum

Boost Vacuum Manifold Kit
- Our Boost / Vacuum manifold kit includes the following: Fore Innovations Boost / Vacuum Manifold (3 x 1/4" barb fittings, 4 x plugs)

Shop all Fore Innovations Fuel Systems at Team Beefcake Racing, Authorized Dealer, Call 1-855-827-7223 9am-9pm EST


TBR Facebook


*Team Beefcake Racing is not responsible for any price changes, mis-marked items or any other mis-printed items. By purchasing items from Team Beefcake Racing, you are agreeing to all sections of our Disclaimer.

** Team Beefcake Inc. doesn’t ship non-CARB legal products to California. For help with finding a CARB exempt product, please call (855-TBR-RACE) to speak with a Product Specialist. Please see our (Carb Exempt Page) for full California shipping information.